How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (2023)

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (1)

Plex Media Server’s remote access function is usually sosmooth to set up thatit’s practically magic. But if you’re having trouble accessing your movies from afar,we’re here to help.

If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access.

RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)

One of the greatest things about the Plex Media Server platform, however, is the ease with which you can access your media fromanywhere.With remote access enabled and properly configured, you can watch your favorite TV shows anywhereyou have internet access: on your phone while you’re sitting in a waiting room, on your laptop while you’re vacationing, or even on a smart TV at a friend’s house.

Most of the time you should have very little trouble setting up remote access to your Plex Media Server, but there are a few instances where your home network configuration can throw you a curve ball. Let’s look at how to enable remote access and then how to trouble shoot remote access issues. If you need help with the initial setup and configuration of Plex Media Server, please refer to our getting started with Plex guide here.

How to Enable Remote Access

During the initial setup of the Plex Media Server, the setup wizard prompts you to enable or disable remote access. While the default state is enabled, you may have opted at the time to disable remote access, or perhaps you inadvertently disabled it while messing around with the system settings later on. Regardless, it’s easy enough to check the status of remote access and enable it if it is currently disabled.

While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar.

(Video) How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (2)

Within the Settings menu select, the “Server” tab. Then, from the left hand navigation pane, select “Remote Access”. By default, you’ll only see a simple view (the information in the large red box below), for the more advanced view with the “Server Mapping” information visible, click on the “Show Advanced” button in the upper right corner of the navigation bar.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (3)

If your server is currently not configured for remote access, it will say “Not available outside your network” as seen above. Click the largeorange button that reads“Enable Remote Access”.

After you enable remote access (or if remote access was already enabled), you’ll see an entry similar to the one below.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (4)

In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.

Although making note of both the internal and external IP addresses and port numbers is useful for troubleshooting, you don’t need to know any of this information for regular day-to-day use of Plex Media Server. The Plex system automatically handles all the connection data as long as you are logged into the same Plex account on your media server and all your client devices. If you’re having issues, however, don’t worry–in the next section we’ll look at the most common issues and how to solve them.

(Video) Fix Plex Media Server Remote Access Issues

Troubleshooting Your Plex Media Server’s Connection

While remote access is generally headache free, sometimes you run into a hiccup or two. If you enable remote access to your Plex Media Server and see an error message like “Not available outside your network”, then you have a little trouble shooting to do.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (5)

It’s important to note that the Plex Media Server can still reach the internet (the server is signed in), but the Plex system can’t access your Plex server from the outside. If you can’t log in, at all then you’ve got a bigger problem on your hands–a general internet outage. (But don’t worry, even if you’re experiencing network problems beyond just setting up your Plex server, we still have you covered.)

Enable UPnP For Automatic Connections

The first thing you should check, when you encounter this error message, is that your router supports either NAT-PMP (less common) or UPnP (more common). Both of these services allow for automatic port forwarding and if your router supports them, then Plex Media Server will automatically configure its own port forwarding.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (6)

Check the documentation of your router or simply search for the router name and additional search terms like “how to enable UPnP” for additional information. If UPnP is off, turning it on will allow Plex to automatically forward itself to the greater internet.

If your router doesn’t support NAT-PMP or UPnP (or you have a pressing reason not to use it) then you’ll want to jump to the section below “Manually Forward Your Ports”

Banish Address Problems With Bridge Mode

RELATED: How to Use Your Router and ISP's Modem/Router Combo In Tandem

(Video) How to Port Forward Plex Media Server | Remote Access Setup |

Farand away the UPnP fix should remedy nearly everyone’s connectivity issues. In rare situations, however, your network configuration can be conspiring against you. Routers have a feature known as Network Address Translation (NAT) that handles the complex task of juggling all the network requests coming into your single public facing IP against all the many internal IP addresses those requests are destined for.

All by itself, the NAT system works awesome. When a NAT system is doubled up with another NAT system, however, it can create issues for apps (like the Plex Media Server) that rely on UPnP to create automatic port forwarding rules. This occurs commonly when you have a router/modem combo supplied by your ISP and your own router plugged into that unit. For help dealing with that particular situation, as well as eliminating double NAT problems in general, check out our guide here.

Manually Forward Your Ports

RELATED: How to Forward Ports on Your Router

If you prefer not to use UPnP or you can’t resolve your double NAT situation that’s playing havoc with UPnP, you can circumvent the entire issue by manually setting up a port forwarding rule. For the unfamiliar, port forwarding is simply when you tell your router “OK router, any requests that come in to my public IP address at port #XXXX, should be forwarded tothis internal IP address at Port #YYYY.”

To do so, you need to tell Plex Media Server you wish to manually specify the port number, and then, at the router level, assign a static IP address to your Plex Media Server computer and create a port forwarding rule. First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).

Check “Manually specify public port”. Unless you have a pressing reason to do so, there’s no need to change the port number here. Click “Apply”.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (7)

If you don’t see the manual port option in your settings, you need to click on the “Show Advanced” button in the upper right navigation bar.

(Video) How to Remote Access Plex Media Server With Port Forwarding

RELATED: How to Set Static IP Addresses On Your Router

Once you’ve turned on the option in Plex, it’s time to access your router’s admin page. How you set up a static IP address and port forwarding rules vary from router to router, but the general premise is the same. You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (8)

If you don’t do this every time your router assigns a new internal address to the media server it will break your port forwarding rule. If you need more information on setting up a static IP address you can search for documentation for your specific router and read up on static IP addresses here.

Once you’ve set a static IP address for the server, then you simply need to tell the router, via port forwarding rule, that all traffic on that port should be directed at that internal IP address. Again, via our DD-WRT router, here’s a general example of what that looks like: we’ve forwarded everything on external port 32400 to the internal IP address of the Plex server, also on port 32400 to keep things simple. Check out our full guide to port forwarding for more information, if you need it.

How to Enable (and Troubleshoot) Remote Access to Your Plex Media Server (9)

After you’ve set the port in Plex and set up the two rules (static IP and port forwarding) in your router, everything is all set. Simply hop back over or to the Plex Media Server control panel to double check the server status page, and enjoy.

Plex Media Server generally works, by the magic of UPnP, right out of the box. But in those rare instances it doesn’t, it’s just a matter of applying a few simple tweaks to get your media server back online.

(Video) How to Enable Remote Access on Plex Media Server

READ NEXT

  • How to Control Plex Media Center with the Amazon Echo
  • How to Download and Sync Media from Your Plex Media Server Offline Viewing
  • How to Share Your Plex Media Library with Friends
  • How To Cast Videos from Plex Media Server to Your Chromecast
  • Six Things You Need to Do Immediately After Plugging In Your New Router
  • How to Restart Your Plex Media Server
  • Apple Watch Series 8 Review: An Uncompromising Wearable Experience
  • Matter Explained: Controllers, Bridges, Border Routers, and More

FAQs

How do I troubleshoot Plex server? ›

General Troubleshooting
  1. Ensure you have the current version of Plex Media Server installed.
  2. Ensure that Plex Media Server is actually actively running.
  3. Verify that your Server is listed on your Devices page.
  4. Disable any VPN on your computer or router.
  5. Disable any proxies being used on your computer or router.
12 Apr 2019

How do I authorize my Plex Media Server? ›

From your Plex Account

Visit plex.tv. If not already signed in, click Sign In and sign in to your Plex account. Once signed-in, click – the Plex Web App loads. Click then choose Authorized Devices.

Is Plex remote access down? ›

No incidents reported today.

How do I access Plex server from another computer? ›

To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.

Why has Plex stopped working? ›

If your Plex app is not finding or connecting to your Plex Media Server, please first ensure that: You are running a current version of the Plex Media Server. Check support.plex.tv for the latest version. You've signed into the Plex Media Server using your Plex account.

How do I reset Plex settings? ›

In some cases, you may decide that you wish to restart your setup on your Plex Media Server from scratch.
...
Remove Libraries and Data
  1. Quit/exit/stop the Plex Media Server to ensure that it is not running.
  2. Delete the contents of the folder(s) for your operating system as noted below.
  3. Restart the Plex Media Server.
28 Feb 2019

Videos

1. Remote Access Plex Media Server Without Port Forward
(CCTV Networking Technical Support)
2. How to fix remote access error in PLEX Media Server?
(Roel Van de Paar)
3. Advanced vs Easy Instructions (Port Forwarding vs UPnP) for Plex Remote Access
(access random)
4. Remote Access To Your Plex Media
(Helping Hands)
5. TOP PLEX MEDIA SERVER SETTINGS - BEST STREAMING SOFTWARE 2022
(Ultimate Tech Hub)
6. How To Fix Double-NAT (Two Routers) | PLEX Media Server
(Jonathan Kearns)
Top Articles
Latest Posts
Article information

Author: Sen. Emmett Berge

Last Updated: 11/04/2022

Views: 5685

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.